The Surface HOG from HOG Technologies is a surface cleaning machine perfect for any surface, including porous / pervious asphalt. The Surface Hog can remove built-up dirt and sediments from pervious (porous) pavement, restoring its drainage functionality.

The Surface HOG uses a 7,250 PSI (499 bar) high-pressure pump to deliver water at a rate of 7.9 gallons per minute (30l per minute) through a 38in single blasting head. The Surface Hog is perfect for marking rejuvenation in parking lots and parking garages as well as airfield marking rejuvenation. The Surface HOG can also retexture surfaces to restore friction and safety.

The Surface HOG comes mounted to an Isuzu NRR chassis making it small, compact, with a tight turning radius. As an option, the Surface HOG can be fitted with a second, 40,000 PSI (2,750 bar) ultra-high-pressure water pump for spot marking the removal of car park markings, turn arrows, and more.

The Surface HOG features a simultaneous vacuum recovery and water reclamation system that passes dirty water through a six-stage filtration system before reusing the water. This system allows the Surface HOG to stay on the job longer without needing to stop and refill.

All of this is performed using clean, potable water with no harsh chemicals added. Unlike past methods of sandblasting, scorching, or using chemicals for removal, water blasting is clean, safe, and environmentally friendly. The needle-sharp water jets can do more than other methods can’t such as getting down into the micro and macrotexture of the surface to remove markings and other built-up sediments all while doing the least amount of damage to the surface.

All of our vehicles come with a training program called HOG Tech University. HOG Technologies is the only manufacturer of equipment that requires a license to operate. This is because HOG Technologies believes that a well-trained operator will have a much higher success rate with a job than someone who is untrained or unqualified to run or operate the equipment. The leading cause of damaged surfaces are the results of untrained people operating the vehicle.

The goal at HOG Technologies is Maximise Productivity, Minimise Costs, and Optimise Results. In order to achieve this, all of our Stripe HOG operators need to be properly trained on how to run the equipment. HOG Tech University does this through initial and constant training, by requiring operators to take refresher courses to renew their licenses, and by offering incentives for doing a job well done.

HOG Technologies remains committed to being your Total Pavement Solution.