Stripe HOG SH7500
The Stripe HOG SH7500 from HOG Technologies is a water blasting system designed for moderate-scale jobs.
The Stripe HOG SH7500 from HOG Technologies is a water blasting system designed for moderate-scale jobs, including runway rubber removal, airfield marking removal, airfield marking rejuvenation, and surface retexturing.
The Stripe HOG SH7500 uses a 40,000 PSI (2,750 bar) ultra-high-pressure pump to deliver water at a rate of nine gallons per minute (34l per minute) through the needle-sharp water jetting nozzles. With a 9 GPM flow rate, the SH7500 is a high-production water blasting system that can remove rubber at a rate of 30,000ft² (2,787m²) per hour on either asphalt or concrete runway surfaces.
The SH7500 can utilise multiple blasting head sizes from 6in all the way up to 22in. The SH7500 can also utilise the HOG Tusk attachment which combines 1in PCD grinding teeth with 40,000 PSI water jet nozzles, allowing for marking removal at twice the speed while only using half of the water.
Using a 22in-wide blasting path, runway rubber removal can be performed at a moderate, yet, efficient rate, saving you both time and money. In addition, runways need to occasionally be retextured due to the effects that constantly changing hot and cold climates can have on the surface.
All of the Stripe HOG models feature simultaneous vacuum recovery of dirt and debris as blasting is happening. Because of this, if there is ever the need for an emergency landing at the airport, the Stripe HOG can shut down and vacate the runway in under one minute.
All of this is performed using clean, potable water with no harsh chemicals added. Unlike past methods of sandblasting, scorching, or using chemicals for removal, water blasting is clean, safe, and environmentally friendly. The needle-sharp water jets can do more than other methods can’t such as getting down into the micro and macrotexture of the surface to remove markings and other built-up sediments all while doing the least amount of damage to the surface.
All of our vehicles come with a training program called HOG Tech University. HOG Technologies is the only manufacturer of equipment that requires a license to operate. This is because HOG Technologies believes that a well-trained operator will have a much higher success rate with a job than someone who is untrained or unqualified to run or operate the equipment. The leading cause of damaged surfaces are the results of untrained people operating the vehicle.
The goal at HOG Technologies is Maximise Productivity, Minimise Costs, and Optimise Results. In order to achieve this, all of our Stripe HOG operators need to be properly trained on how to run the equipment. HOG Tech University does this through initial and constant training, by requiring operators to take refresher courses to renew their licenses, and by offering incentives for doing a job well done.
HOG Technologies remains committed to being your Total Pavement Solution.