Aero-Green Specialty Cleaners, manufactured by Hi-Lite Solutions, is a range of eco-friendly, powerful and cutting-edge cleaning products. Developed by experts with over 20 years of experience in the business, all Aero-Green products use water-based technology. They provide an environmentally sound, cost-effective and safe solution for cleaning and maintenance professionals in a wide range of industries, including commercial, industrial, aviation and the military.

Safe for use on all surfaces, Aero-Green Specialty Cleaners are non-flammable, non-toxic, user-friendly and competitively priced. These cutting-edge cleaning products allow for a 95% reduction in volatile organic compounds (VOCs), while providing an equal or better residue-free cleaning performance than the unsafe, toxic cleaning solvents they were designed to replace. By offering high-performance and environmentally friendly cleaners and degreasers, Aero-Green Specialty Cleaners provides the industrial world with an opportunity to ‘get it clean and to keep it green’.

Runway rubber remover for a safer landing

Carbonized rubber deposits from repeated landings on airport runways cause a dangerous loss of friction, making the touch-down zone slippery and hazardous, endangering the lives of pilots, passengers and ground crew. Removing this rubber is the only way to guarantee that your airfield’s runways are safe.

Aero-Green 4035 Runway Rubber Remover is a readily biodegradable, eco-friendly, strategically designed cleaning solution that quickly and safely emulsifies rubber from the runway surface, dissolving the rubber residue into the solution. It thoroughly removes rubber residue from the runway and restores runway friction, making the touch-down zone safe for landing aircraft.

Aero-Green Runway Rubber Remover, manufactured by Hi-Lite Solutions removes rubber residue from the runway, restores runway friction, making the touch-down zone safe for landing aircraft.
Aero-Green Runway Rubber Remover Improves friction and preserves the life of your runway using low pressure runway rubber removal application.
Aero-Green Runway Rubber Remover also improves friction and preserves the life of your runway using brooming runway rubber removal application.
A runway before using Aero-Green Runway Rubber Remover.
A runway after using Aero-Green Runway Rubber Remover.

Rubber remover for asphalt

Aero-Green 4035 Runway Rubber Remover is designed to be safe to use on asphalt or concrete runways. During runway rubber removal applications, Aero-Green 4035 can be used alone or in combination with sweeper / broom scrubbing action or low-pressure waterblasting. Either application method will thoroughly remove the runway rubber while protecting and preserving the life of the runway, without causing any damage to the existing markings.

A safer approach to chemical rubber removal

Aero-Green 4035 Runway Rubber Remover is non-toxic, water-soluble and very eco-friendly. A residue-free, non-hazardous, non-flammable, non-combustible solution, Aero-Green 4035 contains no caustic ingredients. It will not harm metals, runway pavement seals and caulking compounds, runway lights, landing aircraft or airport personnel.

Aero-Green 4035 will not damage airport equipment, landscaping, or contaminate ground water. It is compatible with oil / water separators and wastewater treatment systems. This state-of-the-art specialty cleaner is so user-friendly and safe to use it does not require a respirator or any hazardous training.

Proven, tested and certified runway rubber remover

Aero-Green 4035 Runway Rubber Remover meets or exceeds the accepted criteria set forth by the Federal Aviation Association for the following Accepted Testing Methods as seen in AC No: 43-205, Sandwich Corrosion Test – ASTM 1110, Immersion Corrosion Test – ASTM F 483, Hydrogen Embrittlement – ASTM F 519, Effect on Painted Surfaces – ASTM F 502, Acrylic Crazing Test – ASTM F 484and Residue – ASTM F 485.

Aero-Green 4035 has been proven and tested, and is certified to McDonnell Douglas CSD #1, Boeing Test D6-17487 Revision P, AMS 1526C, 40 CFR 796.3100 Aerobic Aquatic Biodegradation. Aero-Green 4035 Runway Rubber Remover is aerospace NESHAPS compliant, contains no hazardous materials as defined by the EPA, and no SARA 373 or RCRA listed ingredients.

Products for the aviation industry

The complete line of Aero-Green Specialty Cleaners designed for use by the aviation industry include Aero-Green 4035 Runway Rubber Remover, Aero-Green 4025 Airport High Pressure Cleaner, Aero-Green 4015 Concentrated Aircraft Exterior Cleaner, and Aero-Green 4065 Ready to Use Aircraft Exterior Cleaner.

These products are produced at Hi-Lite Solutions headquarters and the Aero-Green manufacturing facility located in Clear Brook, Virginia. This 13,000ft² facility on five acres houses the administrative and sales offices, as well as the manufacturing plant and warehouse. The blending tanks in the plant enable simultaneous manufacturing of four different product lines at the same time. The expansive warehouse allows for the storage of finished product and raw materials so that orders can be instantly filled as they come in, better serving customers.

Safe and green runways

To find out more about how Aero-Green 4035 Runway Rubber Remover can keep your airport ‘green’ while promoting safety, preventing runway damage, and restoring runway friction at your airfield, please fill out the form below. An Aero-Green customer service representative will contact you.

Interested in our complete line of Aero-Green aviation products? Call or email Aero-Green today.